e061-0000varioPRINT 130

Canon varioPRINT 130 error e061-0000: Charge System Failure

The Canon varioPRINT 130 error e061-0000 is a critical alert linked to the primary charging system. This system is essential for sensitizing the drum correctly. If charging is compromised, the e061-0000 error triggers to prevent further damage. Troubleshooting this error on the varioPRINT 130 involves checking the cleanliness and electrical continuity of the charging assembly.

1 views

Common causes

  • 1Contaminated contacts: Prevents stable electrical connection.
  • 2Worn charging roller: Surface degradation leads to unstable charge.
  • 3HVPS Failure: Voltage supply to the charger is faulty.
  • 4Environmental debris: Accumulated dust causes electrical leakage.

Solutions

Diagnóstico rápido

If the e061-0000 code appears, inspect your output for streaks or inconsistent density. This is a tell-tale sign that the charging unit is not receiving proper current or is heavily contaminated.

Solución paso a paso

  1. Inspect Charge Unit: Open the main unit and carefully remove the charge assembly to check for dust or toner build-up.
  2. Clean Contacts: Use isopropyl alcohol and a lint-free cloth to clean the electrical contacts on the unit.
  3. Verify Function: Reinsert the component and restart the system to clear the error state.

Prevención y mantenimiento

Avoid touching the drum surface with bare skin. Clean electrical contacts quarterly to prevent oxidation or residue build-up caused by operating environment contaminants.

Cuándo llamar a un técnico

If the error persists despite cleaning the contacts, the charging roller may be faulty or the HVPS board could require service.

Ficha técnica del equipo

  • Technology: Electrophotographic printing.
  • Speed: 130 ipm.
  • Connectivity: Gigabit Ethernet.
  • Compatible Consumables: Original Drum and Charge Assembly.
  • Usage: High-volume production.
  • Official drivers / firmware

Steps to follow

  1. 1

    Inspect Charge Unit

    Open the main unit and carefully remove the charge assembly to check for dust or toner build-up.

  2. 2

    Clean Contacts

    Use isopropyl alcohol and a lint-free cloth to clean the electrical contacts on the unit.

  3. 3

    Verify Function

    Reinsert the component and restart the system to clear the error state.

Frequently asked questions

This error points to irregular voltage in the primary charge system, preventing the drum from achieving the correct electrostatic charge.

Yes, continuing with this error will cause print defects like lines or spots and may damage the photosensitive drum.

Inspect the drum unit and the charge assembly. Never touch the drum surface with bare hands.

Regular cleaning of electrical contacts and maintaining a clean operating environment significantly reduces the frequency of this code.

Canon varioPRINT 130 error e061-0000: Charge System Failure | Vimazdev