e06Aficio SP 100

Ricoh Aficio SP 100 Error E06: Paper Jam

The Ricoh Aficio SP 100 error E06 is a standard indicator of a paper jam or end-of-paper sensor error. It happens when paper gets stuck before exiting or if rollers cannot grip the material due to dust. It is a common error that is easily resolved with basic maintenance.

1 views

Common causes

  • 1Wrinkled or bent paper in the tray.
  • 2Worn-out or dirty feed rollers.
  • 3Paper fragments hidden near the fuser area.
  • 4Paper exit sensor blocked by toner dust.

Solutions

Diagnóstico rápido

The E06 code on the Ricoh Aficio SP 100 means the paper path is obstructed. If the motor runs but the paper doesn't advance, the jam is confirmed.

Solución paso a paso

  1. Open the front cover to expose the toner.
  2. Carefully remove the toner cartridge.
  3. Locate and extract any trapped paper.
  4. Clean the feed rollers and ensure they are free of residue.

Prevención y mantenimiento

Use only clean, flat paper. Avoid recycled scraps that may be wrinkled, as they are the primary source of E06 errors.

Cuándo llamar a un técnico

If you have cleared all paper and the E06 persists, an internal sensor might be stuck, which requires technical disassembly.

Ficha técnica del equipo

  • Technology: Desktop Laser Printer
  • Speed: 13 ppm
  • Connectivity: USB 2.0
  • Capacity: 50-sheet tray
  • Consumibles: Ricoh SP 100 toner series
  • Recommended Use: Home office
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Open Cover

    Open the top cover of the printer to access the interior.

  2. 2

    Remove Toner

    Pull out the toner cartridge for a full view of the paper path.

  3. 3

    Cleaning

    Gently remove any paper fragments and clean the rubber rollers.

Frequently asked questions

Open the printer and remove the cartridge; use your hands to pull the jammed paper out slowly.

Yes, wrinkled paper triggers jam sensors very quickly. Avoid reusing sheets that are already printed or bent.

Adjust the paper guides properly in the tray and don't overload it.

If it persists without paper, a sensor might be blocked by dust or small bits of debris.

Ricoh Aficio SP 100 Error E06: Paper Jam | Vimazdev