e05PIXMA TS3300

Canon PIXMA TS3300 error E05: Fix

The Canon PIXMA TS3300 error E05 is a warning that the print system cannot identify one or both installed cartridges. This is common when there is dirt on the cartridge chip or the electrical contacts are not bridging well with the printhead carriage. To resolve error E05 on TS3300 units, a preventive cleaning is usually sufficient. This device is popular for its low cost in home environments.

1 views

Common causes

  • 1Dirty cartridge chip contacts or ink residue.
  • 2Cartridge installed in the wrong slot.
  • 3Physical damage to the cartridge chip from handling.
  • 4Firmware failure preventing recognition of the cartridge ID.

Solutions

Diagnóstico rápido

If the E05 persists after reinstalling the cartridge, check if the gold chip on the cartridge is scratched or has ink stains. Clean contacts are essential for data signal reliability.

Solución paso a paso

  1. Open the cartridge access cover.
  2. Remove both cartridges (color and black) from their slots.
  3. Gently clean the gold chip contacts with a soft, dry cloth or a soft eraser.
  4. Reinstall the cartridges firmly and close the lid for the printer to detect them again.

Prevención y mantenimiento

Do not touch the gold chip with your fingers during installation, as natural oils can interfere with signals. Always use series PG/CL cartridges to avoid firmware compatibility issues.

Cuándo llamar a un técnico

If the message persists after cleaning contacts and testing with new cartridges, the internal connector on the cartridge carriage may be damaged.

Ficha técnica del equipo

  • Technology: Inkjet printer.
  • Speed/approx performance: 7.7 ipm (black).
  • Connectivity: Wi-Fi and USB.
  • Power supply: 60-sheet rear tray.
  • Compatible consumables: PG-545 and CL-546 cartridges.
  • Recommended use: Low-frequency home printing.
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove cartridges

    Open the lid and remove the installed cartridges.

  2. 2

    Clean chips

    Clean the gold contacts with a soft, dry cloth.

  3. 3

    Reinstall

    Snap the cartridges back into place until you hear a click.

Frequently asked questions

It indicates that the ink cartridges are not recognized correctly.

Yes, cleaning the chip contacts on the cartridge usually gets it working again.

Use original PG-545 and CL-546 models.

When print quality drops or the error becomes recurrent.