Fix Fujitsu PrintPartner V40 E04 Error | Paper Jam
Error code E04 on the Fujitsu PrintPartner V40 alerts that paper has stalled inside the internal transport area or failed to actuate the path sensor in time. The printer halts operation to prevent internal hardware damage. Follow these steps to clear the paper path safely.
Common causes
- 1Paper trapped along the transport roller assembly.
- 2Torn paper scraps obstructing the optical path sensor.
- 3Incorrect paper weight, size, or damp paper media.
- 4Dirty or worn paper feed pickup rollers.
Solutions
Troubleshooting Error E04
This fault triggers when internal optical sensors fail to register paper movement within the scheduled timeframe.
Step-by-Step Resolution:
- Power Down: Switch off the printer power and disconnect the power cord.
- Open Access Doors: Open the top cover and front tray. Gently pull out the trapped paper in the normal direction of movement.
- Clean Sensor Flag: Inspect the sensor flag for tiny paper scraps or dust that might keep it stuck in the open position.
- Restart: Reinstall consumables, close all access doors, and reconnect power.
Steps to follow
- 1
Power off and disconnect
Turn off the main switch and disconnect the power cable from the wall outlet.
- 2
Open printer covers
Open the top cover and remove the toner cartridge to inspect the paper path.
- 3
Remove stuck paper
Grasp the sheet evenly with both hands and pull it out slowly without tearing.
Videos
Frequently asked questions
A tiny scrap of torn paper may still be blocking the sensor actuator arm inside the paper passage.
Once the physical blockage is removed and the cover is closed, the printer typically resumes the pending job.