E04PIXMA TS3522

Canon PIXMA TS3522 Error E04: Cartridge Not Detected

The E04 error code on the Canon PIXMA TS3522 means the printer cannot detect or communicate with the ink cartridges. This often happens if the cartridge chips are dirty or if they aren't fully seated in the carriage. The best way to resolve this is by cleaning the chips and reseating the cartridges firmly.

1 views

Common causes

  • 1Dirty electrical contacts on the cartridge chip.
  • 2Use of incompatible or region-locked cartridges.
  • 3Sensor failure in the cartridge carriage.
  • 4Incorrect cartridge installation.

Solutions

Diagnóstico rápido

The E04 error appears on your PIXMA TS3522 LCD screen with an orange alarm light. If the printer isn't recognizing your newly installed cartridges, ensure they are compatible with the TS3522 series and that there is no ink smear on the gold chip surface.

Solución paso a paso

  1. Open the front door and remove both ink cartridges.
  2. Check the chips for any ink or finger oil stains.
  3. Wipe the contacts gently with a dry, lint-free cloth.
  4. Reinsert the cartridges, pushing until they click into their locked positions.
  5. Close the door and wait for the printer to clear the status light.

Prevención y mantenimiento

Always use original Canon or high-quality certified compatible cartridges. Avoid touching the chip area during installation, and perform a head alignment if you notice print quality drops after fixing the error.

Cuándo llamar a un técnico

If the E04 error persists after testing with a different set of cartridges, the internal cartridge carriage sensor may be malfunctioning. In this scenario, contact official support for repair options.

Ficha técnica del equipo

  • Technology: FINE Inkjet
  • Resolution: Up to 4800 x 1200 dpi
  • Connectivity: Wi-Fi, USB
  • Capacity: Rear loading tray
  • Compatible consumables: Canon PG-275 / CL-276 series
  • Recommended use: Personal / Home
  • Official drivers / firmware

Steps to follow

  1. 1

    Access

    Open the access door to reach the cartridges.

  2. 2

    Removal

    Take out the cartridges for inspection.

  3. 3

    Cleaning

    Clean the electronic chips with a soft, dry cloth.

  4. 4

    Installation

    Insert the cartridges until you hear a secure click.

Frequently asked questions

No. It means the printer doesn't recognize the cartridge at all, usually due to a connection issue.

Yes, your printer will be locked and unable to print until it can communicate with the ink cartridges.

The PIXMA TS3522 uses the Canon PG-275 and CL-276 ink series.

Only clean them if you see the E04 error code, as constant cleaning can cause wear on the chip contacts.