e03e-STUDIO 167

Toshiba e-STUDIO 167 error E03: Paper Jam Fix

The Toshiba e-STUDIO 167 error E03 is a notification code relating to the paper path sensors inside the device. This error flags when the input sensors fail to detect paper motion, usually signifying an obstruction or sensor buildup. Why is my Toshiba e-STUDIO 167 showing error E03? It is typically linked to incorrect paper loading or accumulated dust. This unit is a robust monochrome laser machine.

1 views

Common causes

  • 1Sensor Buildup: Dust covering the lens.
  • 2Misaligned Paper: Guides not supporting the stack.
  • 3Worn Feed Rollers: Insufficient grip strength.
  • 4Internal Obstruction: Ripped paper scraps hidden in the feed unit.

Solutions

Quick Diagnosis

The E03 error triggers a jam icon on the interface and stops the motor. If no paper is visible, the sensors are likely obscured by toner dust.

Step-by-Step Solution

  1. Tray Inspection: Ensure the paper guides are flush with the paper stack.
  2. Sensor Cleaning: Carefully wipe the intake area with a dry cloth to clear dust.
  3. Motor Reset: Power off for 30 seconds to allow sensors to recalibrate.
  4. Roller Check: Look for small scraps of paper stuck in the feed rollers.

Prevention and Maintenance

Store paper in a dry place to prevent moisture-related feed issues. Perform roller maintenance every 10,000 pages.

When to Call a Technician

If the E03 persists after sensor cleaning, the sensor hardware has likely failed.

Equipment Technical Data

  • Technology: Monochrome Laser
  • Speed: 16 ppm
  • Connectivity: USB
  • Consumable: T-1640 Toner
  • Recommended Use: Home/Office
  • Official drivers/firmware

Steps to follow

  1. 1

    Check tray

    Pull out the paper tray and ensure all sheets are neatly aligned.

  2. 2

    Clean sensors

    Use a dry cloth to clear any toner dust from the paper input sensors.

  3. 3

    Power cycle

    Shut down for 30 seconds and reboot to reset the paper flag sensor.

Frequently asked questions

Error E03 means the sensor did not detect paper movement, often due to a jam or dirt covering the sensor path.

Not critical, but it prevents printing until the obstruction is removed.

Uses the T-1640 toner.

Keep paper stored in a dry environment and don't overfill the paper tray.

Toshiba e-STUDIO 167 error E03: Paper Jam Fix | Vimazdev