e03M6701N

Error E03 Pantum M6701N: Paper Jam

The Pantum M6701N error E03 is the standard paper jam warning. It triggers when a paper sensor detects that a sheet has failed to reach its destination on time, halting the print system. Follow these steps to clear the path safely.

0 views

Common causes

  • 1Misaligned paper in the input tray.
  • 2Pickup roller dust accumulation.
  • 3Excessive paper humidity.
  • 4Sensor blockage.

Solutions

Quick Diagnosis

The error appears immediately when printing starts. Check the tray input and the rear output area.

Step-by-Step Solution

  1. Turn off and remove the tray.
  2. Open the front cover and remove the toner assembly.
  3. Open the rear hatch and gently pull out the jammed sheet.
  4. Reinstall all parts and power on.

Prevention and Maintenance

Do not overfill the tray. Fan the paper to reduce static cling.

When to Call a Technician

If the path is clear but the error remains, the sensor may be faulty.

Equipment Data Sheet

  • Technology: Monochrome Laser
  • Speed: 30 ppm
  • Connectivity: USB, Ethernet, Wi-Fi
  • Feed Capacity: 250 sheets
  • Compatible Consumables: TL-410 series
  • Recommended Use: Home/Office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check tray

    Remove the paper tray to find crinkled sheets.

  2. 2

    Rear access

    Open the rear door to clear the paper path.

  3. 3

    Check sensors

    Clean path sensors with compressed air if needed.

Frequently asked questions

Error E03 means a paper sensor detected an obstruction, stopping print operations.

Yes, pulling abruptly can damage rollers. Pull gently in the feed direction.

75-90g bond paper. Avoid thin or damp sheets that curl easily.

Adjust tray guides properly and fan the paper before loading.

Error E03 Pantum M6701N: Paper Jam | Vimazdev