e03PIXMA TS3450

Canon PIXMA TS3450 error E03: Paper Jam Fix

The Canon PIXMA TS3450 error E03 indicates that the printer has detected a paper obstruction. This typically happens during the feeding process or if paper is stuck inside the printer body. Removing any remaining paper and ensuring proper alignment in the tray solves this issue.

1 views

Common causes

  • 1Physical paper jam.
  • 2Dusty feed rollers.
  • 3Improperly loaded paper.
  • 4Obstruction of the paper sensor.

Solutions

Diagnóstico rápido

If you see the E03 code, check the input tray and inside the main carriage cavity. Even small debris can trigger the jam sensor.

Solución paso a paso

  1. Inspection: Power off and open access covers.
  2. Removal: Carefully pull out any lodged paper.
  3. Cleaning: Wipe rollers if they look dusty.
  4. Reset: Close covers and press the Stop button.

Prevención y mantenimiento

Use standard paper weights and keep the input area clean from foreign objects. Using cleaning sheets periodically keeps rollers grippy.

Cuándo llamar a un técnico

If the error continues after all paper is removed, the internal paper sensor may be faulty.

Ficha técnica del equipo

  • Technology: Inkjet
  • Speed: 7.7 ipm
  • Connectivity: Wi-Fi
  • Capacity: 60 sheets
  • Compatible Consumables: PG-545 / CL-546
  • Use case: Home printing
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Inspection

    Open covers and look for paper obstructing rollers.

  2. 2

    Removal

    Pull the paper out slowly to avoid tearing.

  3. 3

    Reset

    Close covers and press the Stop/OK button.

Frequently asked questions

Code E03 indicates a paper jam or inability to feed paper due to dirty rollers.

Don't overload the tray and use recommended standard paper.

PG-545 and CL-546 series.

Yes, especially if paper quality is poor or rollers are dusty.