e03PIXMA E3370

Canon PIXMA E3370 error E03: Paper Jam

The Canon PIXMA E3370 error E03 appears when a physical obstacle, usually a piece of paper, hinders the normal movement of the printhead or paper feed. This jam completely halts printing to prevent damage to the rollers or the internal mechanism. To fix the E03 error on your PIXMA E3370, simply locate the jammed paper, remove it carefully, and reset the error counter using the Stop button.

1 views

Common causes

  • 1Poorly loaded or misaligned paper.
  • 2Remaining paper fragments from previous jams.
  • 3Obstruction by foreign objects in the path.
  • 4Dirty or dusty exit rollers.

Solutions

Diagnóstico rápido

If you hear a mechanical 'clicking' noise when trying to print, there's crumpled paper blocking the carriage. Thoroughly check the rear output zone.

Solución paso a paso

  1. Open Cover: Open the front cover to inspect the feed path.
  2. Remove: Extract all visible paper. Use a flashlight if needed to spot small fragments.
  3. Check Guides: Ensure there are no foreign objects like paper clips or staples.
  4. Reset: Close everything and press the 'Stop' button on the printer to resume.

Prevención y mantenimiento

Do not leave paper in the tray if the printer is unused for a long time as humidity deforms it. Keep feed rollers clean by printing periodically.

Cuándo llamar a un técnico

If you have thoroughly cleaned the interior and no paper remains, but the E03 error persists, a paper sensor might be damaged or disconnected.

Ficha técnica del equipo

  • Technology: Inkjet
  • Speed: 7.7 ipm
  • Connectivity: Wi-Fi, USB
  • Compatible consumables: Canon PG-47, CL-57s
  • Recommended usage: Home, students
  • Official Drivers / firmware

Steps to follow

  1. 1

    Open Cover

    Carefully open the top cover to access the inside of the printer.

  2. 2

    Remove Paper

    Remove jammed paper by pulling firmly but steadily.

  3. 3

    Close and Reset

    Close the cover and press the 'Stop' button to reset the system.

Frequently asked questions

It indicates a piece of paper is obstructing the feed path or the output paper sensor.

Yes, it is recommended to turn it off before clearing the interior to avoid injury or damage.

Use standard paper. Heavy or misaligned paper frequently causes E03 errors.

Align the side guides correctly in the tray and do not exceed the stated capacity.