e013-0005varioPRINT iX3200

Canon varioPRINT iX3200 error E013-0005: Paper sensor fix

The Canon varioPRINT iX3200 error E013-0005 reports that the paper passage sensor is blocked or out of service. In a high-production press like the iX3200, this error interrupts material loading. Intervention must be careful not to damage the optical sensors.

1 views

Common causes

  • 1Paper debris obstructing the sensor.
  • 2Defective optical sensor.
  • 3Incorrect material alignment.
  • 4Drive roller wear.

Solutions

Quick Diagnostics

The E013-0005 error appears when trying to load a new job if the input sensor doesn't detect the start of the paper sheet.

Step-by-Step Solution

  1. Remove any sheets blocking the entrance.
  2. Power off the press for a full minute.
  3. Clean the input sensor with dry air.
  4. Retry the paper load once the system is up.

Prevention and Maintenance

Perform a paper path cleaning daily to avoid excess paper fiber debris.

When to Call a Technician

If the sensor continues to error after cleaning the area, it must be replaced by a qualified technician.

Equipment Technical Data

  • Technology: iX digital printing
  • Usage: Industrial
  • Connectivity: High-speed LAN
  • Compatible Consumable: Original iX inks
  • Recommended Use: Mass production
  • Official drivers / firmware

Frequently asked questions

The paper passage sensor fails to detect the material.

It can cause constant production stoppages.

Canon iX inks for maximum durability.

Keep the paper loading area clean.

Canon varioPRINT iX3200 error E013-0005: Paper sensor fix | Vimazdev