e010e-STUDIO 6529A

Toshiba e-STUDIO 6529A error E010: Paper Jam Fix

The Toshiba e-STUDIO 6529A error E010 is a service code referring to an issue with the paper feed assembly. When users search for 'how to clear Toshiba E010 paper jam', they often find that simple cleaning of the rollers solves the problem. This guide helps you identify the root cause of the error E010 and how to perform basic troubleshooting effectively.

1 views

Common causes

  • 1Worn rollers: The rubber surface has lost traction over time.
  • 2Incorrect loading: The paper guides are set too tightly or loosely.
  • 3Debris: Paper fragments blocking the feed path.
  • 4Sensor failure: Damage to the tray detection microswitch.

Solutions

Diagnóstico rápido

The E010 error code is triggered when the copier fails to pick up paper from the tray. If the machine sounds like it is struggling to feed, a jam or dirty roller is almost certainly the culprit.

Solución paso a paso

  1. Open trays: Pull out all paper trays fully to check for hidden paper debris inside the feed mechanism.
  2. Clean rollers: Wipe the feed rollers with a soft cloth and distilled water to restore their grip.
  3. Check sensors: Ensure that the paper presence sensor is not obstructed by small torn pieces of paper.
  4. Restart device: Slide the trays back gently and restart the machine to clear the error status.

Prevención y mantenimiento

Always respect the paper limit markers in your trays. Weekly cleaning of the pick-up rollers with a lint-free cloth will significantly reduce the chance of feed errors.

Cuándo llamar a un técnico

If the rollers are noticeably smooth, shiny, or damaged, or if the error persists even with clean rollers, you need a technician for a maintenance kit replacement.

Ficha técnica del equipo

  • Technology: Laser printer
  • Performance: 65 ppm
  • Connectivity: Ethernet / USB
  • Input capacity: 3200 sheets max
  • Consumibles: T-6529 toner
  • Recommended use: High-volume offices
  • Official drivers / firmware

Steps to follow

  1. 1

    Open trays

    Pull out all paper trays fully to check for hidden paper debris inside the feed mechanism.

  2. 2

    Clean rollers

    Wipe the feed rollers with a soft cloth and distilled water to restore their grip.

  3. 3

    Check sensors

    Ensure that the paper presence sensor is not obstructed by small torn pieces of paper.

  4. 4

    Restart device

    Slide the trays back gently and restart the machine to clear the error status.

Frequently asked questions

Check under the paper tray feed area and carefully pull out any jammed sheets or bits of paper blocking the rollers.

Error E010 often results from worn-out rollers or misaligned paper. If cleaning does not fix it, consider replacing the pickup roller kit.

Use standard bond paper (75-90g/m²) to prevent feed errors and mechanical jams.

Keep your paper trays clean and fan the paper stack before loading to avoid static and feeding friction.

Toshiba e-STUDIO 6529A error E010: Paper Jam Fix | Vimazdev