e010-0000imagerunner-2545i

Canon imageRUNNER 2545i error E010-0000: Solution

Canon imageRUNNER 2545i error E010-0000 indicates a main motor rotation signal irregularity. When the motor doesn't provide feedback, the unit locks up. Verify if the drum rotates smoothly.

1 views

Common causes

  • 1Main motor failure.
  • 2Drum unit mechanical lock.
  • 3Motor rotation sensor defect.
  • 4DC Controller board failure.

Solutions

Diagnóstico rápido

The error E010-0000 locks the machine. Manually rotate the drum to check for resistance.

Solución paso a paso

  1. Power off.
  2. Remove toner/drum unit.
  3. Check for obstructions.
  4. Reinstall and boot.

Prevención y mantenimiento

Use genuine toner to avoid gear wear. Schedule yearly maintenance.

Cuándo llamar a un técnico

If the error persists, the motor or DC Controller board likely needs replacement.

Ficha técnica del equipo

  • Technology: Laser Copier
  • Compatible Consumables: Canon GPR-35 Toner
  • Speed: 45 ppm
  • Recommended Use: Enterprise production
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Disconnect power.

  2. 2

    Check drum

    Ensure drum rotates freely.

  3. 3

    Retry

    Turn on after 10 minutes.

Frequently asked questions

Main motor rotation signal failure.

Yes, a stuck drum can cause this.

Drum unit and GPR-35 toner.

Periodic technical servicing.

Canon imageRUNNER 2545i error E010-0000: Solution | Vimazdev