e01SP 111SU

Ricoh SP 111SU error e01: Troubleshooting

The Ricoh SP 111SU error e01 is the standard indicator for a paper path obstruction. Why does my Ricoh SP 111SU show error E01? It usually occurs when paper does not exit the printer within the expected time frame.

1 views

Common causes

  • 1Overloaded paper tray.
  • 2Worn pick-up rubber rollers.
  • 3Debris in the paper sensor.
  • 4Damaged toner cartridge drum.

Solutions

Quick Diagnosis

If the status light flashes and the printer halts, check the rear exit area first for visible paper snippets.

Step-by-Step Solution

  1. Turn off the printer.
  2. Open the access door.
  3. Remove the toner cartridge.
  4. Slowly pull the jammed sheet out.

Prevention and Maintenance

Use dry paper. Clean the pick-up rollers twice a year.

When to Call a Technician

If the gear assembly makes clicking noises during startup, it may need service.

Technical Specifications

Steps to follow

  1. 1

    Open cover

    Open the front door and pull out the toner.

  2. 2

    Extract paper

    Gently pull the jammed paper out.

  3. 3

    Inspect path

    Ensure no paper fragments are stuck inside.

Frequently asked questions

It signifies that paper has stopped mid-path, blocking the path sensors.

No, it is a routine paper jam code.

SP 100 All-in-One cartridges.

Dust the paper tray and wipe rollers with a dry cloth.