e01Aficio SP 100

Ricoh Aficio SP 100 error E01: Paper Jam Fix

The Ricoh Aficio SP 100 error E01 is a frequent notification signaling a physical obstruction or paper jam within the print path. This error appears when the sensors cannot detect the paper at the expected time. Knowing why is my Ricoh Aficio SP 100 showing error E01 is key to preventing further damage to the internal feed components.

1 views

Common causes

  • 1Overloaded Tray: Too many pages force rollers to pick multiple sheets.
  • 2Poor Paper Quality: Uneven edges cause jamming.
  • 3Dirty Rollers: Paper dust buildup reduces friction.
  • 4Sensor Blockage: Small paper fragments covering the internal sensor.

Solutions

Diagnóstico rápido

Error E01 is accompanied by a solid or flashing red light. If the printer motor engages but fails to pick up the paper, check the input tray area for a visible obstruction.

Solución paso a paso

  1. Turn off the printer and open the front cover to remove the toner cartridge.
  2. Locate the paper jam and pull it out using both hands slowly to prevent tearing.
  3. Verify no small scraps remain stuck inside the path.
  4. Reinsert the cartridge and close the cover; the printer will reset the error automatically.

Prevención y mantenimiento

Never fill the tray beyond its 50-sheet limit. Fan the paper stack before insertion to minimize static buildup. Clean the rubber pickup rollers every 2-3 months to restore traction.

Cuándo llamar a un técnico

If the error persists after clearing all visible obstructions, an internal paper sensor may be broken or misaligned. Technical support will be required.

Ficha técnica del equipo

  • Technology: Laser
  • Duty Cycle: Up to 10,000 pages
  • Connectivity: USB
  • Tray Capacity: 50 sheets
  • Consumible compatible: SP 100 Cartridge
  • Recommended Use: Home/Students
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open Cover

    Open the front cover of the printer to access the toner cartridge area.

  2. 2

    Remove Paper

    Gently pull the jammed paper out in the direction of the paper path.

  3. 3

    Reset

    Close the front cover; the system will automatically reset and clear the E01 error.

Frequently asked questions

The E01 error indicates a paper jam detected by the printer's input or output sensors.

It's not severe, but you should clear the paper gently to prevent tearing, which could leave fragments inside the printer.

Use standard 80gsm paper. Avoid heavy cardstock or labels as they cause frequent jamming.

Do not overfill the paper tray and clean the pickup rollers periodically with a damp, lint-free cloth.

Ricoh Aficio SP 100 error E01: Paper Jam Fix | Vimazdev