e008PIXMA Pro-2000

Canon PIXMA Pro-2000 error E008: Cover sensor fix

The Canon PIXMA Pro-2000 error E008 alerts you that the machine's safety system detects an open cover. This is a preventative measure designed to disable mechanical movement while the internals are accessible. Most of the time, this is corrected by ensuring the lids are perfectly aligned and shut.

1 views

Common causes

  • 1Incompletely closed main lid
  • 2Dust buildup on the safety limit switch
  • 3Obstruction preventing lid from sealing
  • 4Electrical sensor failure from wear

Solutions

Quick Diagnosis

Look for any slight gap at the top cover or cartridge hatch. If the lid seems slightly loose, it may not be triggering the safety switch correctly.

Step-by-Step Fix

  1. Open and close the main top lid firmly.
  2. Inspect the switch area for any obstructions.
  3. Check if any small objects are caught near the lid hinge.
  4. Reboot the printer to re-test the status.

Prevention and Maintenance

Avoid keeping the unit open longer than necessary for maintenance. Use a brush to keep the area around the hinges and switches free of dust.

When to call a technician

If the cover is firmly closed and the error remains, the switch may be broken.

Equipment specs

  • Technology: 12-Ink large format system
  • Performance: High throughput output
  • Connectivity: LAN, USB, Wi-Fi
  • Consumable: PFI (Pro-2000) ink series
  • Usage: Commercial high-end photography
  • Official drivers / firmware

Steps to follow

  1. 1

    Check covers

    Ensure the top main cover is fully closed and locked into place.

  2. 2

    Clean sensors

    Check for dust around the cover sensor switch and clear it out.

  3. 3

    Restart system

    Perform a power restart to reset the monitoring system.

Frequently asked questions

The system's safety sensor detects an unclosed lid.

No, it is a built-in safety lock to prevent movement when the unit is exposed.

Use PFI ink tanks for best print performance.

Always ensure the lid clicks shut when changing cartridges.

Canon PIXMA Pro-2000 error E008: Cover sensor fix | Vimazdev