e008imageCLASS MF244dw

Canon imageCLASS MF244dw Error E008 Solution

The canon imageCLASS MF244dw error e008 is a maintenance alert triggered when the fuser unit's page counter hits its factory-defined limit. This notification ensures you track the fuser's wear and tear to avoid print quality issues. Proper monitoring ensures your office workflow remains uninterrupted.

1 views

Common causes

  • 1Fuser page counter threshold met.
  • 2Wear on fuser pressure roller film.
  • 3Required maintenance cycle elapsed.
  • 4Firmware update needed for maintenance counters.

Solutions

Quick Diagnosis

This error is typically a notification rather than a breakdown. If you notice no drop in quality, the fuser is likely still in acceptable condition.

Step-by-step Solution

  1. Print Sample: Verify print quality to see if toner is sticking correctly.
  2. Maintenance Check: Plan to replace or refurbish the unit according to your usage volume.
  3. Professional Reset: Contact service support to reset the maintenance counter.

Prevention and Maintenance

Keep track of your total page count and proactively schedule maintenance before the alert occurs.

When to Call a Technician

If print quality is consistently poor, the fuser unit must be physically replaced, which is a technician-level task.

Equipment Technical Data

  • Technology: Laser Monochrome
  • Consumable: Canon 137
  • Speed: 28 ppm
  • Official Drivers / Firmware: Support Site