e006fi-6401

Fujitsu fi-6401 error E006: Feeding Fix

The Fujitsu fi-6401 error E006 signals a paper feeding issue detected by the sensor system. This error occurs when the scanner can no longer pull documents reliably due to dirt on the rollers or misaligned pages. Thorough cleaning typically resolves this feeding alert.

1 views

Common causes

  • 1Worn or dirty rubber rollers.
  • 2Saturated separation pad.
  • 3Document obstructions (staples/clips).
  • 4Obstructed feed sensors.

Solutions

Quick Diagnosis

If the fi-6401 triggers an E006 code, check if the intake rollers spin or if they are clogged with paper dust. A dirty scanner cannot maintain consistent document feeding.

Step-by-Step Solution

  1. Clean: Use isopropyl alcohol on a lint-free cloth to clean all rubber rollers.
  2. Clear: Check for paper dust in the sensor path.
  3. Load: Ensure your stack of documents is neat.
  4. Reboot: Cycle power to calibrate the pick motor.

Prevention and Maintenance

Replace consumables according to the service life manual. Avoid scanning documents with adhesives that can leave residue on the feed mechanism.

When to call a technician

If cleaning the rollers does not stop the E006 alerts, the internal feed sensor might need professional replacement.

Technical Data

  • Technology: High-speed scanner
  • Performance: 60 ppm (simplex)
  • Connectivity: USB 3.0
  • Feeder capacity: 100 sheets
  • Consumables: Pick/Brake Roller Kit (Original)
  • Usage: Archive digitization
  • Official Drivers / firmware

Steps to follow

  1. 1

    Clean rollers

    Wipe the feed rollers with a lint-free cloth and isopropyl alcohol.

  2. 2

    Check documents

    Remove staples and ensure paper is flat.

  3. 3

    Reboot

    Power cycle the unit to clear sensor data.

Frequently asked questions

It indicates a document feeding failure, usually caused by dirty intake rollers.

Perform routine cleaning of rollers every 5000 scans.

The official Pick/Brake Roller Kit is the required replacement.

Regularly clean rollers and inspect documents for debris/stickers.

Fujitsu fi-6401 error E006: Feeding Fix | Vimazdev