e006imageFORMULA DR-C230

Canon imageFORMULA DR-C230 error E006: How to fix

The Canon imageFORMULA DR-C230 error E006 occurs when the device fails its image calibration cycle. This is commonly triggered by dust interference or sensor blockage within the ADF path. Maintaining clean internals ensures the sensor can perform an accurate scan sequence.

1 views

Common causes

  • 1Dust on the CIS sensor.
  • 2Mechanical misalignment of the scanner carriage.
  • 3Adhesive residue on the glass path.
  • 4Logic board communication error.

Solutions

Diagnóstico rápido

Error E006 appears upon startup. If the scan light pulses or stops moving, the sensor may be obstructed.

Solución paso a paso

  1. Power down the scanner completely.
  2. Open the upper cover to inspect the sensor glass.
  3. Clean the glass gently using a non-abrasive cloth.
  4. Close the cover and reboot the device.

Prevención y mantenimiento

Clean rollers every 5,000 sheets. Avoid harsh solvents. Use official consumables to protect internal components.

Cuándo llamar a un técnico

If the error persists after cleaning, the motor assembly may need professional inspection.

Ficha técnica del equipo

  • Technology: Document Scanner
  • Speed: 30 ppm
  • Connectivity: USB 2.0
  • Capacity: 60 sheets
  • Consumibles: Feed Roller Kit
  • Recommended usage: Office
  • Drivers / official firmware

Steps to follow

  1. 1

    Power off

    Disconnect the scanner from the power source.

  2. 2

    Clean sensors

    Wipe the sensor glass with a lint-free cloth.

  3. 3

    Restart

    Reconnect and power on to re-calibrate.

Frequently asked questions

This error occurs when the imaging sensor fails the initial calibration process.

It is usually a minor issue related to dust on the sensor that can be easily fixed.

This scanner uses specific feed rollers and separation pads.

Regularly clean the rollers after 5,000 scans.

Canon imageFORMULA DR-C230 error E006: How to fix | Vimazdev