e006-0000imageclass-x1650i

Error E006-0000 Canon imageCLASS X1650i: Repair guide

The Canon imageCLASS X1650i error E006-0000 is a notification of a failure in the fixing system. It indicates that the fuser unit has a mechanical or thermal issue. Below, we explain the nature of this fault.

0 views

Common causes

  • 1Stuck pressure roller.
  • 2Out-of-range thermal thermistor.
  • 3Obstruction by internal paper residue.
  • 4Mechanical wear of fuser gears.

Solutions

Quick Diagnosis

E006-0000 is usually a persistent fault where the fuser cannot rotate or heat properly.

Step-by-Step Solution

  1. Shutdown: Disconnect completely.
  2. Inspection: Check for paper clogging the fuser exit.
  3. Power on: Try a single restart.
  4. Assistance: Contact support if the error persists.

Prevention and Maintenance

Use original consumables exclusively.

When to Call a Technician

This error needs internal part diagnosis.

Equipment Technical Data

Technology: Laser; Speed: 50 ppm; Connectivity: Gigabit; Capacity: 650 sheets; Consumable: 057; Usage: Office; Drivers: Official Canon support.

Steps to follow

  1. 1

    Shutdown

    Disconnect the device.

  2. 2

    Verification

    Check for paper jams.

  3. 3

    Restart

    Power on to test.

  4. 4

    Support

    If persistent, call service.

Frequently asked questions

This error implies a failure in the fixing/fuser unit, often detected by temperature mismatch.

The error is critical; a simple restart rarely solves physical component issues.

It depends on whether it only requires cleaning or a complete fuser module replacement.

Avoid damp paper and keep the printer in dry, clean environments.