e005fi-7131cz

Fujitsu fi-7131Cz error E005: Main Motor Fault

The Fujitsu fi-7131Cz error E005 signals a critical fault in the main motor that moves documents through the unit. This error triggers when the controller detects a deviation in rotation speed or an overload that prevents movement. If you are asking why does my Fujitsu fi-7131Cz show error E005?, the cause may be a severe mechanical obstruction or an electrical motor failure.

1 views

Common causes

  • 1Excessive mechanical resistance (internal jam).
  • 2Drive motor electronic fault.
  • 3Traction gears jammed.
  • 4Extreme wear of traction components.

Solutions

Diagnóstico rápido

If you hear grinding sounds before error E005 appears, the motor is struggling against excessive resistance. The E005 triggers to prevent burning out the motor due to overload.

Solución paso a paso

  1. Inspection: Turn off the device and check for any documents jammed along the feed path.
  2. Rollers: Verify if the rollers can turn manually with ease without heavy resistance.
  3. Restart: Turn on and test with a single sheet of light paper.

Prevención y mantenimiento

Replace the roller kit according to usage frequency. Do not force the scanner with heavy paper or cardstock that is not compatible.

Cuándo llamar a un técnico

If the error E005 persists after checking for jams and clearing the feed path, the drive motor has failed and needs replacement.

Ficha técnica del equipo

  • Technology: Document scanner
  • Performance: 60 ppm
  • Connectivity: USB 3.0
  • Compatible supplies: Roller Kit (fi-7131cz)
  • Recommended use: Document production
  • Official drivers / firmware

Frequently asked questions

It indicates an overload or speed failure in the document feed motor.

If it is a mechanical issue (jam), yes. If it is the motor or control board, it requires professional service.

The official roller kit prevents the motor from being overworked when pulling documents.

By not scanning documents outside the manufacturer's grammage limits.