e005fi-6671

Fujitsu fi-6671 Error E005: Troubleshooting Guide

The Fujitsu fi-6671 error E005 indicates a document feeding failure within the scanner's transport path. This error code is triggered when the scanner's sensors detect an obstruction or inconsistent movement during the digitalization process. It is frequently caused by worn rollers or residual debris.

1 views

Common causes

  • 1Document jam due to overloaded feed tray.
  • 2Dirty feed rollers resulting in paper slippage.
  • 3Obstruction in the scan path by small torn paper scraps.
  • 4Worn-out pick rollers losing their friction.

Solutions

Diagnóstico rápido

The error E005 is visible when the scanner stops during operation. Why is my Fujitsu fi-6671 showing error E005? It usually indicates that the scanner software cannot confirm that the document has passed through the feed sensors correctly.

Solución paso a paso

  1. Access interior: Lift the main cover to check the entire document feed path for jams.
  2. Clean rollers: Using isopropyl alcohol on a lint-free cloth, clean the feed rollers to restore grip.
  3. Check sensors: Ensure no paper dust or torn scraps are interfering with the optical sensor modules.

Prevención y mantenimiento

Regular cleaning of the feed rollers is critical for this model. For consistent performance, replace the maintenance rollers at the manufacturer's recommended intervals of 200,000 sheets.

Cuándo llamar a un técnico

If the rollers are clean and no jams exist, yet the error E005 persists, there may be a failure in the document motor or the internal sensor harness.

Ficha técnica del equipo

  • Technology: High-volume ADF scanner.
  • Throughput: 70 ppm / 140 ipm.
  • Connectivity: SCSI and USB.
  • Capacity: 200-sheet capacity.
  • Consumibles: Maintenance kit fi-6671.
  • Application: Bulk document archival.
  • Official drivers / firmware

Steps to follow

  1. 1

    Access interior

    Lift the top cover to inspect the feed path.

  2. 2

    Clean rollers

    Clean rollers with isopropyl alcohol for better traction.

  3. 3

    Check sensors

    Inspect for small debris blocking the optical sensors.

Frequently asked questions

Error E005 means the scanner cannot move the document through the feed path as expected.

Usually not; it is typically related to jams or dirty components.

The official maintenance kit (rollers) is essential for high-volume use.

Clean the rollers monthly and remove staples before scanning.