e005ADS-1200

Brother ADS-1200 error E005: Motor Jam

The Brother ADS-1200 error E005 occurs when the feed motor encounters excessive resistance while attempting to move the document through the scanner. This fault protects the gears from damage during a jam. It is essential to remove any paper residue blocking the path.

0 views

Common causes

  • 1Foreign object (staple/clip)
  • 2Worn out rollers
  • 3Dirty gears
  • 4ADF motor failure

Solutions

Diagnóstico rápido

If the scanner stops when trying to feed paper and the panel shows E005, there is a physical obstruction or excessive wear on the roller kit preventing the motor from turning freely.

Solución paso a paso

  1. Open the top cover of the ADS-1200 scanner.
  2. Verify that there are no staples, clips, or jammed paper bits in the roller area.
  3. Ensure the rollers are not sticky due to excessive dust or adhesive.
  4. Restart the scanner to allow the motor to perform a new test cycle.

Prevención y mantenimiento

Clean rollers with isopropyl alcohol-dampened cloths monthly. Never feed documents with staples, clips, or adhesive tape that could jam the mechanism.

Cuándo llamar a un técnico

If the error E005 persists after cleaning the area and verifying the absence of jams, the feed motor might be worn out or have a broken internal gear.

Ficha técnica del equipo

  • Technology: Automatic Document Feeder (ADF).
  • Speed: 25 ppm.
  • Connectivity: USB 3.0.
  • Compatible consumables: ADS-1200 roller kit.
  • Recommended use: Fast document capture.
  • Official drivers / firmware

Steps to follow

  1. 1

    Open

    Open the doc cover.

  2. 2

    Clean

    Remove any jammed object.

  3. 3

    Restart

    Restart to reset motor.

Frequently asked questions

E005 indicates mechanical resistance in feed rollers.

It happens if thick docs or staples are fed.

ADS roller kit.

Ensure documents are clear of adhesive.