e005-0000varioPRINT 130

Canon varioPRINT 130 error e005-0000: Troubleshooting Guide

The Canon varioPRINT 130 error e005-0000 is a specific fault related to the cleaning mechanism of the heat roller in the fuser assembly. When this appears, the system halts to protect hardware components. To solve the e005-0000 error on your varioPRINT 130, you must inspect the cleaning cartridge and ensure the film is tracking correctly.

1 views

Common causes

  • 1Cleaning web empty: Reached the cycle limit defined by the firmware.
  • 2Cleaning motor jam: Mechanical obstruction prevents proper movement.
  • 3Excessive toner buildup: Prevents the web from cleaning the roller surface effectively.
  • 4Failed sensor: Misreports the cleaning web status.

Solutions

Diagnóstico rápido

If the machine stops with this code, listen for abnormal mechanical sounds. Often, this indicates that the cleaning web has reached the end of its life or is snagged on the pressure roller.

Solución paso a paso

  1. Check Cleaning Web: Open the fuser unit and inspect if the cleaning web is jammed or fully spent.
  2. Manual Cleaning: Carefully remove any accumulated toner residue on the main roller.
  3. System Reboot: Close all covers and restart the machine to clear the error state.

Prevención y mantenimiento

Always replace cleaning webs using authorized parts. Routine inspections prevent toner dust build-up, which is the primary cause of mechanism jams.

Cuándo llamar a un técnico

If the error persists after replacing the cleaning web, there might be a failure in the cleaning motor that requires professional diagnostics.

Ficha técnica del equipo

  • Technology: Electrophotographic printing.
  • Speed: 130 ipm.
  • Connectivity: Gigabit Ethernet.
  • Input Capacity: High-capacity tray.
  • Compatible Consumables: Océ Cleaning Web Cartridge.
  • Usage: Commercial production.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check Cleaning Web

    Open the fuser unit and inspect if the cleaning web is jammed or fully spent.

  2. 2

    Manual Cleaning

    Carefully remove any accumulated toner residue on the main roller.

  3. 3

    System Reboot

    Close all covers and restart the machine to clear the error state.

Frequently asked questions

This error means the heat roller cleaning system has detected an issue with the path or the lifespan of the cleaning web.

Yes, failure to resolve this can lead to toner build-up, which might permanently damage the heat roller surface.

The fuser uses a specific cleaning web consumable. Replace it immediately when prompted by the system.

Perform monthly sensor cleaning and always heed low-level warnings for cleaning consumables.

Canon varioPRINT 130 error e005-0000: Troubleshooting Guide | Vimazdev