e005-0000imagerunner-1435if

Canon imageRUNNER 1435iF E005-0000: Thermistor Fault

The Canon imageRUNNER 1435iF error E005-0000 is a specific diagnostic alert for the fuser thermistor, the sensor responsible for monitoring heat levels. When the printer detects that the thermistor is unresponsive or providing out-of-range data, it halts operation. Investigating why does my Canon 1435iF show error E005-0000 helps distinguish between simple debris-related failures and a truly broken component.

1 views

Common causes

  • 1Toner residue coating the thermistor tip.
  • 2Disconnected or damaged sensor wiring.
  • 3Electrical malfunction in the thermistor circuit.
  • 4Misalignment preventing the sensor from touching the heater surface.

Solutions

Diagnóstico rápido

The Canon imageRUNNER 1435iF error E005-0000 usually triggers immediately at boot. If the machine cannot detect valid temperature values, it assumes a malfunction and protects itself by shutting down.

Solución paso a paso

  1. Safety Shutdown: Unplug the printer entirely.
  2. Inspect Sensor: Open the fuser area and visually confirm the thermistor position.
  3. Cleaning: Wipe the sensor's surface carefully to remove toner residue.
  4. Boot Test: Restart the system and watch for consistent temperature readings.

Prevención y mantenimiento

Schedule semi-annual cleanings to keep sensors clear of debris. Using original Canon toners significantly minimizes the risk of internal dust buildup on delicate sensors.

Cuándo llamar a un técnico

If the E005-0000 remains after cleaning, the thermistor likely has an internal electrical fault and must be professionally replaced.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Compatible Consumable: Canon C-EXV 43
  • Connectivity: USB / Ethernet
  • Drivers / official firmware: https://www.canon-europe.com/support/imagerunner_1435if

Steps to follow

  1. 1

    Check Sensor

    Power off and visually check the fuser thermistor.

  2. 2

    Clean Sensor

    Wipe the thermistor tip gently to remove toner buildup.

  3. 3

    Test

    Power on and verify if the temperature read stabilizes.

Frequently asked questions

The E005-0000 error indicates that the thermistor is providing incorrect temperature data or has disconnected, which stops the unit for safety.

No, the printer will remain locked to prevent overheating or fire hazards until the sensor issue is resolved.

Perform regular interior cleaning to ensure toner residue doesn't collect on the temperature sensor.

Yes, genuine Canon toner produces less waste, reducing the risk of buildup on thermal sensors.