e003fi-6671

Fujitsu fi-6671 error E003: Scan Glass Obstruction

The Fujitsu fi-6671 error E003 occurs when the sensors detect a reading obstruction. This usually stems from adhesive residue or dust covering the optical glass strip. This guide helps you restore your scanner.

1 views

Common causes

  • 1Dust on the optical scanning glass.
  • 2Adhesive residue from document labels.
  • 3Worn-out rubber feed rollers.
  • 4Paper scraps caught in the ADF mechanism.

Solutions

Diagnóstico rápido

If you see the Fujitsu fi-6671 error E003, visually check for lines, dirt, or dust spots on the thin glass scanning strip located beneath the feed rollers.

Solución paso a paso

  1. Unplug the scanner.
  2. Clean the reading glass strip thoroughly.
  3. Clean the pick-up and feed rollers.
  4. Reset the machine.

Prevención y mantenimiento

Cleaning the rollers and glass once a week is critical for high-volume scanners. Avoid scanning documents with wet ink or fresh stickers.

Cuándo llamar a un técnico

If the error remains after cleaning, the internal sensor array might need calibration or replacement by a technician.

Ficha técnica del equipo

  • Technology: High-speed ADF Scanner
  • Speed: 80 ppm / 160 ipm
  • Connectivity: USB 2.0
  • Capacity: 200 sheet ADF
  • Consumible compatible: FI-6671K Roller kit
  • Recommended Use: Enterprise document imaging
  • Official Driver/Firmware

Steps to follow

  1. 1

    Power off

    Unplug the scanner from the power outlet.

  2. 2

    Clean glass

    Wipe the scanning glass strip using a non-abrasive glass cleaner.

  3. 3

    Inspect sensors

    Check the document path for any paper remnants or debris.

Frequently asked questions

It is an obstruction or sensor error related to the scanning glass or the paper transport path.

Perform a thorough cleaning of the glass strip and rubber feed rollers using a lint-free cloth.

Regular maintenance every 5,000 scans is recommended for consistent performance.

Visit the official Fujitsu/PFU scanner support portal for the latest driver downloads.

Fujitsu fi-6671 error E003: Scan Glass Obstruction | Vimazdev