e002varioPRINT 105

Canon varioPRINT 105 error E002 Troubleshooting

The Canon varioPRINT 105 error E002 signifies a timing error in the fuser unit's heating cycle. When the printer registers that the temperature is not rising fast enough, it halts to protect the components. Recognizing the Canon varioPRINT 105 error E002 helps minimize downtime by identifying if the fault is environmental or hardware-based.

1 views

Common causes

  • 1Delayed thermistor response due to heavy dust.
  • 2Unstable electrical current during start-up.
  • 3Obstructed air vents leading to sensor timeouts.
  • 4Internal heating element driver failure.

Solutions

Diagnóstico rápido

This error typically shows up after a cold start. The unit cannot reach operational temperature within the software's safety window.

Solución paso a paso

  1. Extended Power Down: Switch off the machine and unplug it for 15 minutes to dissipate all residual power.
  2. Check Ventilation: Ensure the printer is not positioned against a wall that blocks air circulation.
  3. Restart: Reconnect and turn the device on; check for normal warm-up behavior.
  4. Check Power Supply: Ensure no major power surges are affecting the machine.

Prevención y mantenimiento

Vacuum the internal air filters monthly. Proper airflow is vital to keep sensors from tripping due to heat-soak.

Cuándo llamar a un técnico

If the code persists, the DC controller or the internal thermistor is likely damaged and requires specialist repair.

Ficha técnica del equipo

  • Technology: Océ DirectPress
  • Speed: 105 ipm
  • Connectivity: Gigabit Ethernet
  • Input capacity: Up to 8,900 sheets
  • Compatible consumables: Océ varioPRINT toner
  • Recommended use: Industrial production printing
  • Drivers / official firmware

Frequently asked questions

Similar to E001, this code signals that the fuser assembly failed to heat within the defined timeframe.

A restart might clear the alert temporarily, but hardware faults will cause it to return.

Use only Océ-branded toner specified for the varioPRINT 105.

Keep the output areas clear and ensure intake vents remain dust-free.