e002imageCLASS LBP162dw

Canon imageCLASS LBP162dw E002 Error: Fix

The Canon imageCLASS LBP162dw E002 error highlights a thermal regulation failure within the fixing unit (fuser). The printer halts its operation when the temperature exceeds safe parameters or fails to reach the required target, effectively preventing potential damage. Why is my Canon imageCLASS LBP162dw showing E002? Often, this is caused by a failing thermistor or excessive heat retention.

1 views

Common causes

  • 1Fuser thermistor malfunction.
  • 2Overheating due to poor airflow.
  • 3Heating element failure.
  • 4Unstable electrical supply.

Solutions

Diagnóstico rápido

If the status lights blink in unison, the unit is in error mode. Note if the printer body feels excessively hot.

Solución paso a paso

  1. Power off the printer.
  2. Allow the unit to cool for at least 30 minutes.
  3. Check for jammed paper that could impede heat dissipation.
  4. Connect the printer to a dedicated wall power source.
  5. Restart and monitor for the error message.

Prevención y mantenimiento

Keep the printer in a well-ventilated area. Avoid heavy cardstock if it causes the printer to run hot.

Cuándo llamar a un técnico

If the E002 error returns immediately after restart, the fuser assembly requires professional repair or replacement.

Ficha técnica del equipo

  • Technology: Monochrome laser
  • Speed: 30 ppm
  • Connectivity: Wi-Fi, Ethernet, USB
  • Feeding: 250-sheet tray
  • Compatible Consumables: Canon 051 / 051H toner
  • Use: Business office
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Unplug the printer.

  2. 2

    Cool down

    Wait 30 minutes for the fuser to cool.

  3. 3

    Check path

    Ensure no paper bits are clogging the fuser.

  4. 4

    Direct power

    Plug into a wall outlet directly.

Frequently asked questions

It is a fuser thermal regulation error, likely indicating an overheating or sensor issue.

It's a critical thermal alert; power down immediately to prevent hardware damage.

Use genuine Canon 051 series toner.

Ensure proper ventilation and use standard media weights.