e002-0000imageRUNNER 2530i

Canon imageRUNNER 2530i error E002: Fuser

The Canon imageRUNNER 2530i error E002 is a low fuser temperature warning. Why does my Canon imageRUNNER 2530i show error E002? The thermistor failed to detect heat rise, resulting in a safe system stop.

1 views

Common causes

  • 1Failing heater lamp.
  • 2Thermistor defect.
  • 3Power supply issue.
  • 4Fuser film wear.

Solutions

Quick Diagnosis

If the error appears on boot, the heater element might be dead.

Step-by-step Solution

  1. Turn off for 10 minutes.
  2. Clear any jams.
  3. Restart the system.
  4. Reset in service mode.

Prevention and Maintenance

Use dry paper and perform preventive maintenance every 100k pages.

When to Call a Technician

If the reset doesn't work, the fuser unit needs professional replacement.

Equipment Technical Data

Steps to follow

  1. 1

    Power off

    Reset the sensor.

  2. 2

    Check

    Look for output jams.

  3. 3

    Reboot

    Wait 10 minutes.

Frequently asked questions

The fuser roller temperature is too low for operation.

No, it stops to protect components.

Genuine NPG toner for 2530i.

It's common as the fuser approaches its end of life.

Canon imageRUNNER 2530i error E002: Fuser | Vimazdev