e002-0000imageCLASS X1440P

Fix Canon imageCLASS X1440P Error E002-0000

The Canon imageCLASS X1440P error E002-0000 signals a heating problem within the fusing unit. Understanding what does error E002-0000 mean on Canon is the first step to protecting the machine from further hardware damage.

1 views

Common causes

  • 1Thermistor temperature detection fault.
  • 2Blown fuser heater lamp.
  • 3Voltage irregularity.
  • 4Physical blockage in the fuser rollers.

Solutions

Quick Diagnosis

The printer halts during warm-up. This is an indicator that the heater lamp or thermistor is failing to reach target temperature.

Step-by-step Solution

  1. Shutdown: Turn off the power immediately.
  2. Cool Down: Wait 20 minutes to allow the fuser to return to ambient temperature.
  3. Power Source: Verify the printer is connected directly to a wall outlet.
  4. Power On: Attempt to start the print cycle again.

Prevention and Maintenance

Avoid turning the machine on and off frequently. Keep the environment clean to prevent dust from entering the fuser unit.

When to Call a Technician

Persistent E002 errors imply a broken heating lamp or thermistor, which requires a certified repair service.

Device Technical Sheet

  • Technology: Laser
  • Speed: High-performance
  • Connectivity: LAN / USB
  • Compatible Consumable: CRG series
  • Recommended Use: Enterprise office
  • Drivers / official firmware

Steps to follow

  1. 1

    Safe Shutdown

    Power off and wait for the fuser to cool down for 20 mins.

  2. 2

    Check power

    Ensure stable power directly from wall outlet.

  3. 3

    Restart

    Attempt to boot the machine again.

Frequently asked questions

It indicates a temperature rise failure in the fusing unit.

Do not attempt to use the printer; fuser faults need professional inspection.

No, it's a hardware fault located in the fuser assembly.

Use surge protectors and keep the printer in a temperature-stable environment.