Fix Canon imageCLASS D1650 Error E001-0000
The Canon imageCLASS D1650 error E001-0000 warns of excessive temperature in the fusing assembly. This fault occurs when the heating element remains powered too long or fails to regulate, exceeding safe temperature thresholds and triggering an immediate emergency stop of the printer.
Common causes
- 1Heater relay is stuck.
- 2Power board fault.
- 3Poor ventilation.
- 4Unstable electrical supply.
Solutions
Quick Diagnosis
This error is likely an overheating issue that might be solved by cooling. If it persists, it indicates a failure in the heating control circuit.Step-by-Step Fix
- Disconnect the power immediately.
- Allow for a 20-minute cool-down.
- Ensure vents are dust-free.
- Restart the unit.
Prevention and Maintenance
Avoid running massive print jobs consecutively. Keep the printer away from enclosed spaces that trap heat.When to Call a Technician
If the error returns, the DC Controller or the power board is likely damaged and needs professional replacement.Equipment Data Sheet
- Technology: Laser
- Speed: 40 ppm
- Connectivity: USB/Ethernet
- Consumable: Toner 052/052H
- Use: Office
- Official Drivers / firmware
Steps to follow
- 1
Cool Down
Shut off the printer and wait 20 minutes to allow the fuser to return to room temp.
- 2
Check Airflow
Confirm all exterior air vents are unobstructed for proper cooling.
- 3
Power Test
Turn on and watch for a normal boot sequence.
Frequently asked questions
The E001 code indicates the fuser temperature exceeded the maximum safe limit, triggering a hard system lock.
Yes, it protects the printer from potential melting or heat-related component failure.
Genuine Canon toner prevents residue buildup that can interfere with fuser sensors.
Avoid continuous high-speed printing and ensure the area is well-ventilated.