e000-010varioPRINT 6330

Canon varioPRINT 6330 error E000-010: Charge Failure

The Canon varioPRINT 6330 error E000-010 is a specific notification about an imbalance in the drum's electrostatic charge system. This code usually appears in high-volume equipment when the charge sensor detects a discrepancy in the applied voltage. Resolution involves checking electrical connections and high-voltage cables. This device is a high-capacity digital press designed for the graphics industry.

1 views

Common causes

  • 1Short circuit in the high-voltage charger wiring.
  • 2Toner residue buildup leading to electrical arcing.
  • 3Faulty electrostatic charge sensor.
  • 4Unstable voltage in the facility's power supply.

Solutions

Quick Diagnosis

The E000-010 error is displayed on the front panel, halting any queue jobs. If the code persists on boot without mechanical movement, it is likely a failure in the charging power supply unit.

Step-by-Step Solution

  1. Perform a full system reboot from the main circuit breaker.
  2. Inspect the condition of the charging cables behind the drum unit.
  3. Clean the charger area to rule out toner buildup causing electrical arcing.
  4. Ensure there is no humidity condensation affecting the static charge.

Prevention and Maintenance

In high-production environments, daily cleaning of corona wires and charge sensors is critical. Maintaining constant ambient humidity (40% to 60%) will prevent static failures like E000-010. Always use certified consumables to avoid unwanted particle deposits.

When to Call a Technician

This error requires professional intervention if cleaning steps do not resolve the fault, as it involves adjusting output voltages on the charge control card.

Device Technical Sheet

  • Technology: Piezoelectric Inkjet (Océ)
  • Speed: Up to 330 ipm
  • Connectivity: PRISMAsync Controller
  • Feed Capacity: High-volume input modules
  • Consumable: Océ CrystalPoint Toner (solid)
  • Recommended Use: 24/7 Industrial production
  • Official Drivers / support