e000-0006imagePRESS C170

Error E000-0006 Canon imagePRESS C170: Technical Fix

The Canon imagePRESS C170 error E000-0006 is a critical fault warning regarding the fuser's temperature control system. It triggers when the detected temperature exceeds safe operating thresholds. The system locks out all functions to prevent irreversible hardware damage.

1 views

Common causes

  • 1Failing thermal sensor (thermistor) providing false temperature readings.
  • 2Stuck relay contact in the fuser power control board.
  • 3Accumulation of debris and toner on rollers forcing fuser overheating.
  • 4Failure in the main DC controller board.

Solutions

Quick Diagnosis

Error E000-0006 occurs when the thermistor detects uncontrolled heat rise. Check if there is dust buildup in the fuser area's ventilation slots.

Step-by-step Solution

  1. Deactivate the printer immediately using the main switch.
  2. Disconnect the power cord from the wall outlet.
  3. Wait 30 minutes for the fuser to cool down completely.
  4. Do not attempt self-cleaning if you lack technical expertise; contact your authorized support partner.

Prevention and Maintenance

Perform regular cleaning of the air intake filters. Always use manufacturer-certified consumables, as non-genuine toner can leave residue on rollers, throwing off the fuser's temperature calibration.

When to Call a Technician

This error requires mandatory professional intervention to clear the service mode logs after repairing the thermal unit.

Technical Specifications

  • Technology: Production color laser printing.
  • Speed: Up to 70/80 ppm.
  • Connectivity: Ethernet 10/100/1000.
  • Input Capacity: Industrial high capacity.
  • Compatible Consumables: Original Canon C170 Toner.
  • Usage: Production and graphic arts.
  • Official Drivers / Firmware

Frequently asked questions

This error points to a serious anomaly in the fuser heating control system, specifically a prolonged abnormal heating state.

No, error E000-0006 is a preventative safety lockout; do not attempt to print until checked by a technician.

Use original Canon C170 series toner and spare parts to avoid damage to the fusing unit.

Keep air filters clean and use certified paper to prevent jams that could overload the fuser.