e-mem-fullRP2f Plus Mobile

Honeywell RP2f Plus Mobile error E-MEM-FULL Fix

The Honeywell RP2f Plus Mobile error E-MEM-FULL indicates that the printer's internal memory is saturated and cannot process further tasks. This typically occurs when oversized graphics or an accumulation of print jobs clog the buffer. A simple restart is usually enough to flush temporary data and resolve the issue.

1 views

Common causes

  • 1Sending excessive resolution image files that exceed the RAM buffer.
  • 2Accumulation of pending jobs in the queue without handshake confirmation.
  • 3Installation of large external fonts onto the Flash memory.
  • 4Communication errors leaving orphaned temporary files in the buffer.

Solutions

Quick Diagnosis

If the printer stops responding after sending a complex label or a batch of files, check if the LED status indicates a memory saturation state.

Step-by-Step Solution

  1. Forced Power Off: Shut down the printer and wait 5 seconds before turning it back on.
  2. Print Queue: Clear all pending jobs from the host device’s printing queue.
  3. Optimize: Ensure any uploaded logos are under 100kb and in a memory-efficient format.
  4. Reset: If the error remains, perform a factory reset via the official support app.

Maintenance and Prevention

Avoid batch-sending multiple jobs at once; wait for each to finish. Use optimized label templates to minimize memory usage per print.

When to Call a Technician

If the memory persists in showing 'full' after clearing files and restarting, the logic board might have a data retention failure.

Technical Specs

  • Technology: Direct Thermal.
  • Speed: 5 ips.
  • System Memory: 128MB RAM / 128MB Flash.
  • Connectivity: USB, Bluetooth.
  • Compatible Consumables: 2" thermal paper rolls.
  • Usage: Retail and logistics.
  • Official Support

Steps to follow

  1. 1

    Restart

    Power off and on the printer to clear the temporary buffer.

  2. 2

    Clear queue

    Delete pending print tasks from your mobile device settings.

  3. 3

    Optimize images

    Reduce the resolution of complex logos if you're sending heavy files.

Frequently asked questions

The printer buffer is saturated with too many commands or complex graphics that weren't processed.

Yes, if the memory is full, you cannot send new print jobs until the buffer is cleared.

No, this is a logic/memory error, although format issues in labels can cause memory loops.

Make sure to send optimized label formats and avoid overloading the printer with massive external fonts.

Honeywell RP2f Plus Mobile error E-MEM-FULL Fix | Vimazdev