e-600pd43

Honeywell PD43 error E-600: Troubleshooting

The Honeywell PD43 error E-600 indicates that the printer's sensor cannot correctly detect the gap between labels. This is critical for RFID printing, as exact positioning is required for the chip encoding process. Recalibrating the media sensor often resolves this issue immediately. The PD43 series is designed for heavy-duty industrial warehouse use.

1 views

Common causes

  • 1Sensor blocked by sticky adhesive residue.
  • 2Media path obstructions.
  • 3Incorrect sensor sensitivity settings.
  • 4Hardware failure after high-impact usage.

Solutions

Quick Diagnostics

E-600 alerts you to a communication failure between the sensor and the media. If your labels keep feeding indefinitely, calibration is required.

Step-by-Step Solution

  1. Ensure labels are perfectly centered.
  2. Access the 'Media' menu.
  3. Select 'Auto-Calibrate'.
  4. If it fails, clean the sensor path.

Prevention and Maintenance

Keep the sensor path free of label adhesive and paper dust using a soft brush.

When to Call a Technician

If the printer fails to register even after manual calibration, the internal sensor hardware may be damaged.

Device Technical Specs

  • Tech: Thermal Industrial
  • Print type: RFID
  • Connectivity: Serial, USB, LAN
  • Supplies: Industrial Label Rolls
  • Usage: Logistics
  • Official support

Frequently asked questions

Run the auto-calibration sequence from the printer settings.

It is a calibration issue that does not damage the machine.

Use standard PD series industrial labels.

Clean sensors at every ribbon/media roll change.