e-404ds-1630

Epson DS-1630 error E-404: Lamp Failure Troubleshooting

The Epson DS-1630 error E-404 notifies that the scanner's lighting system is unstable or failing to power on. This code stops digital scanning to prevent low-quality files. Learning how to fix error E-404 on Epson scanners usually starts by verifying a stable power supply.

1 views

Common causes

  • 1Power failure: Unstable voltage in the USB connection.
  • 2LED wear: Lamp lifespan reached after years of use.
  • 3Dirty glass: Accumulated debris prevents the sensor from calibrating brightness.
  • 4Driver error: Software conflict preventing lamp activation.

Solutions

Quick Diagnosis

The E-404 error appears right when attempting to start a scan, with the lamp flashing or not illuminating at all.

Step-by-Step Solution

  1. Power cycle: Unplug USB and power cables.
  2. Reconnect: Connect directly to the host computer without USB hubs.
  3. Calibration: Open the scan utility and select 'Lamp Calibration'.
  4. Cleaning: Ensure the glass is spotless on both sides.

Prevention and Maintenance

Avoid rough movement of the scanner. Keeping the exposure glass clean is essential; use microfiber cloths and avoid harsh chemicals that can damage the optical coating.

When to Call a Technician

If the E-404 error persists after calibration and power cycling, the LED lamp has reached the end of its life and needs replacement.

Device Technical Sheet

  • Technology: ADF / Flatbed Scanner
  • Compatible consumable: Maintenance roller kit
  • Connectivity: USB 3.0
  • Recommended use: Heavy document scanning
  • Official drivers / firmware

Steps to follow

  1. 1

    Power cycle

    Turn off and unplug the scanner for 5 minutes to allow the system to cool.

  2. 2

    Calibration

    Run the calibration tool via Document Capture Pro software.

  3. 3

    Cleaning

    Wipe the glass with a lint-free soft cloth.

Frequently asked questions

It indicates that the scanner lamp does not reach the brightness level required for scanning.

You can try calibrating and cleaning, but if hardware has failed, professional service is required.

This device doesn't use ink, only periodic maintenance roller kits.

Monthly cleaning is recommended to prevent sensor errors and image artifacts.