e-402DS-1630

Epson DS-1630 error E-402: Feeding issue

The Epson DS-1630 error E-402 indicates a feed failure. Why does my Epson DS-1630 show error E-402? Dirt or dust buildup on rollers is the primary culprit.

0 views

Common causes

  • 1Dirty feed rollers.
  • 2Wrinkled paper.
  • 3Over-tight guides.
  • 4Sensor dust.

Solutions

Diagnóstico rápido

E-402 implies the sensor didn't detect the page after feeding attempt.

Solución paso a paso

  1. Open ADF cover.
  2. Wipe rollers with moist cloth.
  3. Verify guides aren't too tight.
  4. Reboot.

Prevención y mantenimiento

Use roller maintenance kits bi-annually.

Cuándo llamar a un técnico

If rollers are worn and cleaning doesn't restore grip.

Ficha técnica del equipo

Steps to follow

  1. 1

    Clean rollers

    Use damp cloth.

  2. 2

    Check paper

    Ensure alignment.

  3. 3

    Reboot

    Cycle power.

Frequently asked questions

The ADF feed roller failed to grab the paper.

Clean rollers regularly.

None, it is a scanner.

Usually just a cleaning.