e-203fi-7130Cz

Fujitsu fi-7130Cz Error E-203: ADF Paper Jam

The Fujitsu fi-7130Cz error E-203 means a document is stuck inside the ADF mechanism. Clearing this requires manual intervention to avoid damaging the rollers or optical sensors. Proper cleaning is the best way to keep this error from returning.

1 views

Common causes

  • 1Forgot to remove staples or paper clips.
  • 2Dirty or oxidized rubber feed rollers.
  • 3Use of poor-quality or torn paper.
  • 4Dust buildup blocking the exit sensor.

Solutions

Quick Diagnosis

If scanning stops halfway, you have an E-203. Check for staples or sticky paper that might cause feeding friction.

Step-by-Step Solution

  1. Unlock: Release the ADF cover.
  2. Clear: Remove the sheet gently.
  3. Clean: Wipe rollers with F1 cleaner.
  4. Reset: Close the lid to reset sensors.

Prevention and Maintenance

Remove all metal fasteners before feeding. Clean feed rollers every 5,000 pages to maintain grip.

When to Call a Technician

If you see no paper but the error persists, the paper detection sensor might be faulty.

Ficha técnica del equipo

  • Technology: Duplex ADF Scanner
  • Speed: 30 ppm
  • Compatible Consumable: fi series roller kits
  • Connectivity: USB 3.0
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open ADF lid

    Use the release lever to open the top of the ADF.

  2. 2

    Remove document

    Pull the jammed document out slowly.

  3. 3

    Close tightly

    Close the lid firmly until it clicks.

Frequently asked questions

The machine detects a document obstruction in the automatic document feeder.

Yes, especially with stapled or crumpled pages.

Use the official F1 Cleaner and lint-free cloths.

The Automatic Document Feeder component.