e-201zc100xt

Error E-201 Zebra zc100xt: Feed Fix

The Zebra zc100xt error E-201 is a common notification that signifies an issue in the card feeding system. This usually triggers when the printer fails to draw a card due to slippage or misalignment. Resolving this often involves checking for stuck cards and ensuring the rollers are free from debris.

1 views

Common causes

  • 1Static electricity between cards.
  • 2Oily residue on feed rollers.
  • 3Incorrect card media specifications.
  • 4Debris blockage in the feed path.

Solutions

Quick Diagnosis

If your Zebra zc100xt reports E-201, look into the card bin. Often, cards are physically stuck or the sensor is blocked by card debris.

Step-by-Step Fix

  1. Open the top cover of the unit.
  2. Take out the card stack and fan them to separate any stuck cards.
  3. Run a cleaning card through the machine to refresh the grip of the feed rollers.
  4. Reload the card hopper and attempt to print again.

Maintenance and Prevention

Consistent roller cleaning prevents the buildup of card dust and skin oils. Keep the environment free of lint and store card media in protective sleeves.

When to Call a Technician

If the feed mechanism continues to slip or reports error E-201 after thorough cleaning, the internal motor might require a professional inspection.

Device Technical Specifications

  • Technology: Dye-sublimation thermal transfer
  • Performance: 200 cards per hour (full color)
  • Connectivity: USB 2.0 & Ethernet
  • Capacity: 100-card input hopper
  • Compatible Consumable: Zebra ZC-series ribbons
  • Recommended Use: IDs and membership cards
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Remove cards

    Open the lid and remove the cards from the input hopper.

  2. 2

    Clean rollers

    Use a cleaning card to remove residue from internal rollers.

  3. 3

    Reset hopper

    Reinsert the cards, ensuring they are perfectly square.

Frequently asked questions

Error E-201 indicates a failure in the card feed mechanism, preventing the unit from grabbing the next card.

No, it is a standard mechanical feed error usually caused by misalignment.

Always use genuine Zebra ribbons and cleaning cards for optimal performance.

Regular maintenance with a cleaning card after every 500 prints is recommended.

Error E-201 Zebra zc100xt: Feed Fix | Vimazdev