e-201scansnap ix1250

Fujitsu ScanSnap iX1250 error E-201: Motor jam

The Fujitsu ScanSnap iX1250 error E-201 indicates a feed motor stall due to a paper jam or blockage. Why does my Fujitsu ScanSnap iX1250 show error E-201? It usually occurs when paper fails to feed correctly. This scanner is highly efficient for everyday office work.

1 views

Common causes

  • 1Document jam in the transport path.
  • 2Contaminated rollers causing slippage.
  • 3Staples or paper clips in feed path.
  • 4Mechanical gear failure.

Solutions

Diagnóstico rápido

The error E-201 is a motor protection trigger sensing resistance in the document feeder.

Solución paso a paso

  1. Open cover: Check the feeder for any stuck documents.
  2. Clean rollers: Wipe the rubber rollers to restore grip.
  3. Power reset: Re-initialize the scan engine.

Prevención y mantenimiento

Regularly use roller cleaning wipes to ensure smooth operation. Avoid overloading the tray.

Cuándo llamar a un técnico

If the motor makes grinding sounds after clearing debris, the transmission is damaged.

Ficha técnica del equipo

Steps to follow

  1. 1

    Open cover

    Check the feeder for any stuck documents.

  2. 2

    Clean rollers

    Wipe the rubber rollers to restore grip.

  3. 3

    Power reset

    Re-initialize the scan engine.

Frequently asked questions

The motor cannot feed the paper properly, usually because of an internal obstruction.

It's safe to open the unit and remove any jammed items carefully.

Once every few months or when feed issues start appearing.

If they become hard or start to lose their grip completely.