e-16M7605DW

Pantum M7605DW error E-16: ADF Jam

The Pantum M7605DW error E-16 indicates a paper jam in the Automatic Document Feeder (ADF). This error occurs when the sensor detects a stall while pulling documents through for scanning. This guide details the process of inspecting and clearing the feeder path.

0 views

Common causes

  • 1Documents with staples/clips.
  • 2Worn or wrinkled paper.
  • 3Dirty feed rollers.
  • 4Obstructed feed path.

Solutions

Diagnóstico rápido

If your ADF stops scanning and displays E-16, a sheet is stuck mid-path. Open the lid and check the rollers.

Solución paso a paso

  1. Open feeder lid.
  2. Remove paper.
  3. Clear roller path.
  4. Reset printer.

Prevención y mantenimiento

Remove staples and paperclips before ADF use.

Cuándo llamar a un técnico

If the motors stall despite clearing all paper, the feeder drive motor might require attention.

Ficha técnica del equipo

  • Technology: Laser Printer.
  • Features: ADF Scanning.
  • Connectivity: USB.
  • Consumable: TL-410.
  • Drivers / firmware official: https://global.pantum.com/support/download

Steps to follow

  1. 1

    Open ADF cover

    Lift the cover of the automatic document feeder.

  2. 2

    Clear jam

    Gently pull out any stuck paper from the feeder path.

  3. 3

    Close and reset

    Close the ADF lid until it locks to clear the E-16 error.

Frequently asked questions

Automatic Document Feeder paper jam.

Ensure documents are stapled-free and properly aligned.

Crinkled or worn documents frequently trigger feeder jams.

Clean rollers every 3 months for reliable feeding.