e-105scansnap ix1250

Fujitsu ScanSnap iX1250 error E-105: USB connection fix

The Fujitsu ScanSnap iX1250 error E-105 occurs when the device fails to maintain a data connection through the USB interface. Why does my Fujitsu ScanSnap iX1250 show error E-105? It is frequently caused by loose cables or inadequate USB power delivery. This compact scanner is highly efficient for document digitization.

1 views

Common causes

  • 1Damaged or low-quality USB cable.
  • 2Insufficient power output from PC port.
  • 3Corrupted software drivers.
  • 4Internal communication chip failure.

Solutions

Diagnóstico rápido

Error E-105 is typically a communication timeout error where the PC loses contact with the scanner during active processing.

Solución paso a paso

  1. Check USB cable: Re-seat the USB cable and try a different port directly on the PC.
  2. Restart Software: Quit and relaunch ScanSnap Home software.
  3. Power Reset: Power cycle the scanner to reset the internal communication module.

Prevención y mantenimiento

Use shielded USB 3.0 cables to ensure data integrity. Clean the ADF rollers regularly to prevent paper-feeding issues that might trigger secondary communication errors.

Cuándo llamar a un técnico

If the error persists across different computers, the scanner's communication port may be faulty.

Ficha técnica del equipo

  • Technology: ADF Document Scanner
  • Speed: 25 ppm / 50 ipm
  • Connectivity: USB 3.0, Wi-Fi
  • Capacity: 50 sheets
  • Consumable: ScanSnap FI-X1250 Roller Set
  • Recommended use: Daily document digitizing
  • Official drivers / firmware

Steps to follow

  1. 1

    Check USB cable

    Re-seat the USB cable and try a different port directly on the PC.

  2. 2

    Restart Software

    Quit and relaunch ScanSnap Home software.

  3. 3

    Power Reset

    Power cycle the scanner to reset the internal communication module.

Frequently asked questions

This error means the scanner is having trouble talking to your computer, usually due to a bad USB cable or port issue.

No, it is a communication error and does not damage the hardware, but it must be fixed to resume scanning.

Only if you see paper feed errors. E-105 is purely a connection issue.

Regularly clean the glass and rollers with recommended cleaning agents.

Fujitsu ScanSnap iX1250 error E-105: USB connection fix | Vimazdev