e-105TM-P20

Epson TM-P20 error E-105: Battery Power Fault

The Epson TM-P20 error E-105 is a critical power alert indicating that the battery is either too low for printing or experiencing a charging fault. This is designed to prevent data corruption and hardware failure. Why does my Epson TM-P20 show error E-105? It usually indicates that the power level has dropped below the threshold required for high-current printing operations.

1 views

Common causes

  • 1Battery below operating threshold.
  • 2Voltage mismatch from 3rd party charger.
  • 3Dirty battery contacts.
  • 4Battery end-of-life.

Solutions

Quick Diagnosis

If the printer shuts down when you start printing, E-105 confirms a battery depletion issue. Confirm with the official power adapter.

Step-by-Step Solution

  1. Original Charger: Use only Epson-supplied cables.
  2. Cable Check: Confirm the connection is secure.
  3. Reseat Battery: Pull out the battery and reinsert it.
  4. Full Charge: Let it charge until the indicator light signifies completion.

Maintenance and Prevention

Avoid extreme temperatures. Practice partial charging cycles if possible.

When to Call a Technician

If the device fails to charge even with the original cable, the battery cell is likely worn out.

Device Technical Data

Steps to follow

  1. 1

    Power source

    Plug the original Epson power adapter into a wall outlet.

  2. 2

    Check status

    Verify that the charging light on the printer or charging cradle is illuminated.

  3. 3

    Charge

    Allow the device to charge for at least 30 minutes before printing.

Frequently asked questions

The device detects insufficient power or a battery communication error.

Yes, but it is recommended to let it charge fully for best performance.

Built-in rechargeable lithium battery.

Avoid fully draining the battery whenever possible.