e-105QL-810W

Brother QL-810W Error E-105: Fix and Guide

The Brother QL-810W error E-105 signifies a communication or detection problem with the label roll. This often happens due to a dirty sensor or incorrectly loaded media. To fix the Brother QL-810W error E-105, you need to perform a physical inspection and cleaning of the media sensing area.

0 views

Common causes

  • 1Adhesive residue on the sensor.
  • 2Incompatible or off-brand label rolls.
  • 3Misaligned media roll installation.
  • 4Debris inside the print mechanism.

Solutions

Diagnóstico rápido

If the printer status light flashes, it indicates the internal sensor cannot see the label transition. This is common if adhesive builds up on the sensor area.

Solución paso a paso

  1. Remove roll: Open the cover and remove the DK roll.
  2. Clean sensor: Wipe the media sensor with an alcohol-moistened swab.
  3. Reinstall: Place the roll back in, ensuring correct alignment.

Prevención y mantenimiento

Only use genuine DK rolls. Avoid leaving the cover open for extended periods to prevent dust from settling on the sensor.

Cuándo llamar a un técnico

If the sensor remains unresponsive after cleaning, it likely suffered electrical failure and requires official service.

Ficha técnica del equipo

  • Technology: Direct Thermal
  • Speed: 110 labels/min
  • Connectivity: Wi-Fi, USB, AirPrint
  • Compatible supplies: Original DK rolls (serie DK-2205, etc.)
  • Recommended use: Professional shipping and organization
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove roll

    Open the cover and remove the DK roll gently.

  2. 2

    Clean sensor

    Use an alcohol-dampened cotton swab to gently wipe the media sensor.

  3. 3

    Reinstall

    Insert the roll back into the housing ensuring correct alignment.

Frequently asked questions

The E-105 error typically means the sensor is blocked by adhesive or dust, preventing it from detecting the label roll size.

It is an operational error; printing will resume immediately once the sensor is clear and the roll is recognized.

Only use original DK rolls. Off-brand or non-standard labels may cause sensor misreadings.

Clean the print head and sensor area after every roll change to ensure maximum lifespan and print quality.

Brother QL-810W Error E-105: Fix and Guide | Vimazdev