e-1005ScanSnap SV601

Fujitsu ScanSnap SV601 Error E-1005: Solution

The Fujitsu ScanSnap SV601 error E-1005 signals a calibration error within the optical system. As an overhead scanner, it relies on strict reference points to function; E-1005 means it has lost these points.

0 views

Common causes

  • 1Contaminated calibration mat.
  • 2External light interference.
  • 3Optical calibration mismatch.
  • 4LED sensor module failure.

Solutions

Diagnóstico rápido

Error E-1005 prevents scanning. If the mat has white marks, the sensor misreads the scan area.

Solución paso a paso

  1. Clean the lens and the mat.
  2. Ensure room light is not too harsh.
  3. Perform a re-calibration in ScanSnap Manager.
  4. Reset USB link.

Prevención y mantenimiento

Protect the SV601 lens. Keep the background mat clean. Always use the provided software for calibration.

Cuándo llamar a un técnico

If sensor light seems unstable or faulty after re-calibrating, the LED module might need repair.

Ficha técnica del equipo

  • Technology: Overhead document scanner
  • Resolution: 285 dpi
  • Connectivity: USB 2.0
  • Consumables: None (routine maintenance only)
  • Use Case: Books and bound documents
  • Official drivers / firmware

Steps to follow

  1. 1

    Clean glass

    Wipe the scanning area clean.

  2. 2

    Verify lighting

    Avoid direct reflections near the scanning mat.

  3. 3

    Recalibrate

    Run the calibration wizard in ScanSnap Manager.

Frequently asked questions

The image sensor calibration failed to match the internal reference values.

Yes, it creates artifacts that break the calibration map.

Latest ScanSnap Manager is best for hardware compatibility.

Keep the black background mat clean and scratch-free.