e-10ecotank-et-m1170

Epson EcoTank ET-M1170 Error E-10: How to Fix

The Epson EcoTank ET-M1170 error E-10 appears when the printer cannot pull paper from the feed tray. This is typically caused by debris on the pickup rollers. It is a frequent issue that disrupts workflows.

1 views

Common causes

  • 1Dirty pickup rollers.
  • 2Overly tight paper guides.
  • 3Internal paper debris.
  • 4Low-quality paper media.

Solutions

Quick Diagnosis

If the error E-10 appears, check if the rollers are dirty or if the paper guides are too tight.

Step-by-Step Solution

  1. Remove all paper.
  2. Clean rubber rollers with a lint-free cloth.
  3. Align guides to match paper size.
  4. Reset printer power.

Prevention and Maintenance

Use high-quality paper and clean the rollers monthly.

When to Contact Support

If the rollers have no grip after cleaning, consult a technician.

Device Technical Sheet

  • Technology: Monochrome EcoTank.
  • Speed: 39 ppm.
  • Connectivity: Wi-Fi, Ethernet.
  • Capacity: 250 sheets.
  • Consumable: 532 Ink Bottle.
  • Recommended Use: Busy office.
  • Drivers/Firmware

Steps to follow

  1. 1

    Remove paper

    Clear the paper tray.

  2. 2

    Clean rollers

    Wipe rollers with damp cloth.

  3. 3

    Load paper

    Align guides properly.

  4. 4

    Reset

    Power cycle the device.

Frequently asked questions

Rollers failed to pick up paper.

No, it's a common maintenance issue.

Compatible with 532 ink bottles.

Clean tray monthly.

Epson EcoTank ET-M1170 Error E-10: How to Fix | Vimazdev