e-07selphy square qx10

Canon SELPHY Square QX10 error E-07: How to fix

The canon selphy square qx10 error e-07 indicates that the internal sensor has detected a paper feed obstruction. This prevents the unit from completing the printing cycle. Users can usually resolve this by clearing the path and cleaning the rollers. Consistent care is required to ensure the QX10 maintains optimal performance.

2 views

Common causes

  • 1Excessive paper humidity causing sheets to stick together.
  • 2Dust buildup on the rubber feed rollers.
  • 3Misalignment of the paper cassette.
  • 4Mechanical wear on the gear assembly.

Solutions

Diagnóstico rápido

An E-07 error is usually accompanied by a blinking red light on the front panel. If you hear a grinding noise while the unit tries to feed, it confirms that a physical jam is present.

Solución paso a paso

  1. Power off: Press the power button until the device shuts down to prevent motor damage.
  2. Remove cassette: Carefully remove the paper cassette and check for crumpled paper.
  3. Clear path: Open the rear cover and gently pull out any obstructions.
  4. Restart: Turn the device on and try a new print job.

Prevención y mantenimiento

Store paper in a dry, room-temperature environment to prevent sticking. Use only genuine ink-paper sets to avoid roller slippage and internal gunk buildup.

Cuándo llamar a un técnico

If the red light persists after clearing the jam and restarting, the feed sensor might be faulty. Consult Canon authorized service centers.

Ficha técnica del equipo

  • Technology: Dye-sublimation thermal transfer
  • Performance: Approx. 43 seconds per print
  • Connectivity: Wi-Fi via SELPHY Photo Layout app
  • Paper capacity: 1 sheet
  • Compatible supplies: XS-20L Series
  • Best for: Mobile printing and scrapbooking
  • Drivers / official firmware

Steps to follow

  1. 1

    Power off

    Hold the power button until the lights turn off to prevent electrical damage.

  2. 2

    Check tray

    Slide the paper cassette open and check for misaligned photo paper.

  3. 3

    Clean rollers

    Wipe the feed rollers with a dry, lint-free cloth.

Frequently asked questions

Error E-07 typically indicates a paper jam or an obstruction in the path that prevents the printer from feeding the sheet correctly.

It is not a system failure, but forcing the printer to run while jammed can damage the internal motor.

You must use the XS-20L color ink and label set for this specific model.

Cleaning the internal components with every ink cartridge replacement helps maintain print quality.