e-06DPK7002

Fujitsu DPK7002 error E-06: Fix and tips

Fujitsu DPK7002 error E-06 occurs when the carriage detects an obstruction. This is often caused by a tangled ribbon or physical blockage in the print head path. Users often ask why is my Fujitsu DPK7002 showing error E-06.

0 views

Common causes

  • 1Tangled ribbon.
  • 2Paper debris.
  • 3Carriage motor failure.
  • 4Printhead pins stuck.

Solutions

Diagnóstico rápido

The error appears when the carriage cannot complete its travel. Check the ribbon.

Solución paso a paso

  1. Disconnect the power.
  2. Inspect the ribbon and carriage.
  3. Clear any debris.
  4. Power on.

Prevención y mantenimiento

Keep the printer rails clean.

Cuándo llamar a un técnico

If the motor makes grinding noises.

Ficha técnica del equipo

  • Technology: Dot Matrix
  • Connectivity: Parallel
  • Consumibles: DPK7002 Ribbons
  • Official Link

Steps to follow

  1. 1

    Power off

    Switch off the printer.

  2. 2

    Check ribbon

    Look for ribbon jams.

  3. 3

    Reset

    Power on again.

Frequently asked questions

It indicates a printhead movement or ribbon jam issue.

It can be bad for the printhead.

Compatible DPK series ribbons.

Keep rails clean.