e-06-error-datosTM-T70

Epson TM-T70 POS Error E-06: Communication Failure

Epson TM-T70 POS error E-06 indicates that data packets are not reaching the printer. Many users ask why does my Epson TM-T70 show error E-06, which usually involves simple cable or port issues. Logical troubleshooting of the link usually fixes it.

1 views

Common causes

  • 1Damaged or loose data cables.
  • 2Driver/Port configuration mismatch.
  • 3Electromagnetic interference.
  • 4Outdated driver version.

Solutions

Quick Diagnosis

If the error occurs mid-job, check the spooler status on your host computer first.

Step-by-step Solution

  1. Disconnect and re-seat the data cable.
  2. Open Device Manager and verify no 'Unknown Device' errors exist.
  3. Match the baud rate settings (if using Serial).
  4. Restart the spooler service in the host system.

Prevention and Maintenance

Avoid cables longer than 2 meters and perform firmware updates when recommended.

When to call a technician

If you have tested with a known good cable and port and the error remains, the main communication board may be faulty.

Equipment Technical Data

  • Technology: Thermal Printer
  • Speed: 250 mm/s
  • Connectivity: Multi-interface
  • Feed Capacity: 80mm
  • Compatible consumables: Thermal paper
  • Recommended use: POS terminal
  • Official drivers / firmware

Steps to follow

  1. 1

    Check cables

    Ensure USB or Serial cables are connected securely at both ends.

  2. 2

    Check drivers

    Reinstall or update the printer driver in your OS.

  3. 3

    Configure port

    Ensure the COM or IP port matches the printer's configuration.

Frequently asked questions

The E-06 error indicates a communication failure between the host device and the printer.

Yes, the device will stop printing until the communication link is restored.

Use shielded high-quality USB or Serial cables to avoid data corruption.

Keep cables away from heavy electrical equipment and avoid unnecessary adapters.