e-05LW-400

Epson LabelWorks LW-400 Error E-05: Cutter Jam

The Epson LabelWorks LW-400 error E-05 signifies a cutter jam obstruction. Tape is stuck in the blade mechanism. If your Epson LabelWorks LW-400 reports error E-05, remove residue blocking the cutter.

1 views

Common causes

  • 1Adhesive buildup on blade.
  • 2Media too thick.
  • 3Label debris.
  • 4Cutter motor failure.

Solutions

Quick Diagnosis

Error during cutting. Check the exit slot for stuck tape.

Step-by-Step Solution

  1. Open Cover: Access cassette area.
  2. Remove Tape: Extract cassette and clean residue.
  3. Test: Press cut button again.

Prevention and Maintenance

Use genuine labels. Clean blade area with a cotton swab.

When to Call a Technician

If the cutter remains jammed without debris, the mechanism is likely worn out.

Technical Specs