e-05EcoTank ET-2760
Epson EcoTank ET-2760 error E-05 fix
The Epson EcoTank ET-2760 error E-05 is a scanner unit failure code. It occurs when the machine cannot properly calibrate the scanner lamp or move the carriage along its tracks. This guide answers why does my Epson EcoTank ET-2760 show error E-05 and provides steps to clear physical transport locks.
0 views
Common causes
- 1Transport lock lever remains locked.
- 2Obstruction in the scanning path.
- 3Faulty optical LED module.
- 4Scanner motor communication timeout.
Solutions
Diagnóstico rápido
If you see E-05, the scanner light is likely malfunctioning or jammed. Verify the scanner transport lever position.Solución paso a paso
- Unplug the device.
- Ensure the transport lock lever is set to 'unlocked'.
- Check for any loose bits of paper or debris blocking the track.
- Power cycle to allow automatic calibration.
Prevención y mantenimiento
Always engage the transport lock before moving the machine. Avoid using cleaning chemicals directly on the glass, as they can cause fogging.Cuándo llamar a un técnico
If the carriage is unobstructed but the lamp fails to illuminate, the scanner light module might require a professional part replacement.Ficha técnica del equipo
- Technology: Ink Tank / Optical Scanner.
- Speed: Office-grade speed.
- Connectivity: Wi-Fi, USB.
- Capacity: 100-sheet input.
- Consumibles: 502 Ink Series.
- Usage: Home office.
- Official drivers / firmware
Steps to follow
- 1
Power off
Disconnect from power to safely inspect the unit.
- 2
Check scanner lock
Ensure the physical scanner lock lever is in the 'unlocked' position.
- 3
Restart
Turn on and wait for the scanner to initialize.
Frequently asked questions
The scanner carriage is obstructed or the transport lock is still engaged.
Yes, just make sure the lever underneath the lid is in the correct position.
Use the 502 series for the tank, regardless of scanner faults.
Never move the unit without engaging the transport lock.